1. Before beginning your manicure, be sure to buff the nail, pushing the cuticles away and wiping off any oils that might have built up on the surface.
2. After you have cured the gel color base of your choice, apply a layer of basecoat or topcoat.
3. Cure the top or base for 10 seconds (Important: avoid wiping off any sticky residue).
4. Cut your desired design and immerse it in a cup or a bowl containing lukewarm water for 15-30 seconds.
5. Using tweezers, carefully slide the decal from the backing paper, then adhere it to the desired spot on the nail.
6. Seal the design with two layers of top coat and cure. Don’t forget to seal the edges.
7. Cure again for 30-60 seconds in LED lamp.
PRO TIPS:
-For the 3D designs to keep their embossed texture, apply a very thin layer of matte top coat.
-If the decal is bigger than the nail area, cut or apply acid-free primer around the edges of the nail to remove the excess product
-VERY IMPORTANT to seal the edges to avoid any moisture entering and lifting the design.
